Posted by Vaughn on Wednesday, May 28, 2003 at 9:26PM :
In Reply to: steering question posted by galen on Wednesday, May 28, 2003 at 12:18PM :
A little play
Adjust the drag link tube ends by turning the screw in till it seats, then back off to first hole.
To adjust steering gear shaft, center wheels and turn screw in till it seats (engine side of steering box, has a nut cover and lock washer that has to be removed), then back off 1/8 turn.
See if this helps. If you still have a lot of play, worn parts - steering gear shaft bushings, steering knuckle flange area, bearings.