Posted by Tom J. on Monday, May 26, 2003 at 11:44AM :
In Reply to: Re: My original seat springs are ready posted by Andy on Monday, May 26, 2003 at 6:54AM :
My springs were in really good shape. I only had to make one repair on the flat metal, the part that holds the coils on the passenger very bottom side that goes inside of the bottom frame. Then I will place my cardboard between them and tack weld them together. My springs were so good that I was able to save all of the little clips to use as one would to clamp the material to the bottom and back frames.