Posted by David Hogan on February 21, 1999 at 14:43:34:
My '55 C3PW either came without an oil filter or had the original removed.
I got an old assembly and lines from VPW but I am not sure where to hook up the inlet, outlet and oil pressure lines.
There are two likely looking ports in the block directly above the oil pressure relief valve. My current guess is that the top port
will have a tee fitting and feed both the oil pressure gauge and the filter inlet (bottom of filter cannister).
I figure that the top port is for the filter outlet (top of filter cannister).
Any info would be appreciated, since I can't find any pictures in all my literature that are thorough or agree with each other.