Posted by Me on March 18, 1999 at 20:28:30:
In Reply to: wont start warm posted by Wesley Mutch on March 18, 1999 at 11:47:15:
Looks like most everything was covered before me. Thought I would add: is your gas cap tight if it has original gas cap it reads something like tight for forging loose for normal. meaning a gas cap that is screwed on tight is for going under water try loosing the gas cap. also on the M37B1 had a check valve on the vent line to carb if bad it let vapors fill to carb throat and flood engine when warm shut off. maybe bill can expand on this. I don't know if they added check valves to older models.