Posted by George on Saturday, January 18, 2003 at 5:37PM :
In Reply to: Re: Clutch Question posted by Ron in Pa. on Saturday, January 18, 2003 at 5:21PM :
Thanks,I had the disk right side to the fly wheel. They just barely rub. The coil springs in the new disk are doubled, (i.e. coil inside of a coil). The stock disk fits fine no problem. I also installed a new fly wheel and bolts. Bolts were from Mopar performance. Same thread as old one and the head is the same thickness on both 5/16"; but uses a larger diameter socket, (3/4"). The old ones used 5/8" socket. The
Follow Ups: