Re: Part Numbers for Front Axle Bushings?


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Vaughn on Wednesday, November 20, 2002 at 9:44PM :

In Reply to: Part Numbers for Front Axle Bushings? posted by derek on Wednesday, November 20, 2002 at 12:36PM :

Chrysler Number = 924249 $45 from dealer

WWII 3/4 Ton WC = G-121-01-27848

M37 - Just ask any of the guys that deal with M37 parts. Ask for the trunnion and knuckle bronze axle bushing (both are the same).

They all interchange, but I found the M37 fit a little tighter than the stock bushings. Get new axle oil seals Federal Mogul 450451. Have a machinist cut you a driver out of round stock and drive seal and bushing in together. After hitting the driver and the bushing is moving inward keep hitting until you feel and hear like you hit something solid, your where you need to be.

I would also suggest you get knuckle repair kits. They will have the large and small felt oil seals, gasket, and some kits have the steel shims for adjusting the knuckle drag (important!). Make sure you ask if the kits include those.





Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com