Posted by dallas on October 24, 1998 at 21:15:06:
In Reply to: pto gasket 48 b1-pw posted by Steve Elliot on October 24, 1998 at 16:14:16:
The idea is to use stacked gaskets between PTO
and tranny to acheive desirable backlash between
pto idler gear and transmission countershaft gear.
You have to remove plate from right side of trans-
mission to measure backlash using dial indicator.
Backlash should not be less than .001 inch. Will
probably take 4-6 gaskets.
Good luck.
Dallas