Posted by Daniel Northcott on Saturday, August 31, 2002 at 4:24PM :
I hope someone here can help me. I recently purchased a 48 B1PW and it needed brakes so I put it on blocks and took all the wheels off. Once I got into one of the rear wheels it was full of grease so I decided that I would change all the seals for the wheel bearings and change seals and end play bushings for the universals. I have now done all that and changed the grease and everything except my front driver side wheel went back together fine.
My problem with that is that after I put my front universal back together it spins free unless I turn the steering in either direction and then it binds right up. I have taken it apart and put it back together a few times to make sure that everything it going in the right spots and it always is. I have tried everything that I can think of so I hope someone here can give me some help. Thanks in advance.
Daniel Northcott
Follow Ups: