Posted by Keith in Washington on Wednesday, August 14, 2002 at 1:10PM :
In Reply to: Re: Lockers and T/C question posted by Don in Missouri on Wednesday, August 14, 2002 at 12:46PM :
The WC 1.5 ton transfer case brackets bolt right up to the pre-drilled holes in the Carryall crossmember. I got the brackets from Dave C. (DC). I am sure that you can find these with out too much problem. If you use the e brake on the transfercase you will have to trim the floor or drop the transfer case 2". I dropped my transfer case. My final solution will be to install disk brakes in the rear and remove the e brake from the transfer case. I will use the e brake lever and connect it to the E brake on the rear calipers. I will use Helitools disk brakes with a slightly different caliper that has the exact same dimenions as the ones Ray recommends except that they have the e brake.