Re: WELDING TO FRAME AND AXLE???


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Frank Irons on Thursday, July 25, 2002 at 8:34PM :

In Reply to: WELDING TO FRAME AND AXLE??? posted by WRC on Thursday, July 25, 2002 at 7:33AM :

I would use Fleetweld 37, a 6013 rod that is easy to use. I do not advise welding the frame. On the axle housing I would skip weld and not run one long continuous bead so you don't warp the housing. Amperage and electrode size will have to be determined by material thickness. If its a heavy truck housing I would use a 3/16 electrode at 180 amps. If you try to weld 1/4 plate to a 3/16 frame that setting would be too hot. I would try to bolt the bracket to the frame if possible.




Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com