Posted by Marty on Friday, May 31, 2002 at 5:12PM :
In Reply to: Headliner installation question... posted by Dana on Friday, May 31, 2002 at 11:25AM :
Dana, I just finished doing mine. It's not a particularly fun job but the headliner does get trapped behind the trim strips. Gordon's right....don't forget to find the screw holes in the roof support before you get too far along. It's almost impossible to find them once you get the 50 or so screws all around the perimiter. I think the best way to attach the draft seals is to nail them in place using the same nails VPW sell for the cowl lacing. On my WDX that's how they attached it originally & likely you'll find remnants of the nails on yours too. You could use pop rivets if you don't care about originality. I used 3M black weather strip adhesive & then nailed it up....that way when it comes to the headliner you don't need 8 hands to hold it all in place!
Have fun!