Posted by aKeith in Washington on Sunday, May 26, 2002 at 10:35PM :
In Reply to: brake drum posted by bruce on Sunday, May 26, 2002 at 1:26PM :
Heat and an impact hammer. If that does not get you there, take the hub off with the drum still attached. Remember to back off the shoes before pulling the hub and drum. Once off you can apply heat directly to the end of the screws and the hub where they screw in. Applying heat from the front side heats the drum up real nice but not a lot of heat gets to the hub where the screws are. Once you apply heat directlt to the hum thet usually come out real easy. Putting it back together use anti seize and new screws. I use allen head ones that I find a a local fastener distribuiter.