Posted by David on Wednesday, February 13, 2002 at 10:34PM :
Hello,
I've got a W300M with a vacuum brake booster. There are 2 rubber hoses about 3/4" diameter that come off of the booster and run along the frame to the engine compartment. The hose on the rear side of the booster attaches to a pipe on the firewall before tapping into the rear of the intake manifold. The hose attached to the front side of the booster is plugged at the engine compartment and I can't see evidence of what it should be hooked to. Can anyone help on this?
Thanks
David
Follow Ups: