Posted by Glenn in Maine [172.69.58.38] on Tuesday, September 19, 2023 at 08:13:00 :
In Reply to: Re: Speedo Drive Gear for Transfer Case posted by Clint Dixon [172.71.255.2] on Monday, September 18, 2023 at 19:52:36 :
Clint,
Thanks for the combinations. I do have the 9x16 tires. As it turns out the third member in the rear had the original 4.89 gears however someone had let water sit in the diff for a while and are severely pitted thus why i am replacing. I am not sure it is the original axel to the WM300 as my speedo has always been reading incorrectly (or could be a different xfer case who knows as i dont have a history on the truck). As you mentioned it could be the drive gear or the pinion. I was anticipating on getting the correct pinion and drive gear to have on hand when I rebuild the xfer case. Thanks for confirming the pinion count!! Great knowledge here