Posted by Vaughn [172.69.34.104] on Friday, June 16, 2023 at 15:32:24 :
If anyone else is planning or currently installing VPW kit, there are differences between kit and procedures to be aware of. Procedures included or not included in VPW kit were developed by Helitool for the Gen 1 kit, there are diference between that kit and VPW's kit. The Pedal Mount Plate is about 1/8 wider than the Gen 1, you can only center one of the large holes in one of the two ribs. The large elctrical hole to the right of the plate is covered about 1/2 inch by the plate instead of 1/4 noted in the procedures. I got to the point I no longer relied on the procedures and started checking every step. I made a template for drilling the big hole on the outside of the coel for the push rod booster. I've included images of things I've ran into so far, that anybody installing one needs to be aware of. See link.
Follow Ups:
