Posted by Todd [172.70.214.144] on Tuesday, March 28, 2023 at 16:20:45 :
The photo is looking at the driver's side floorpan bottom, and shows the two driver's side bolt holes for the cab to chassis connection. I replaced the floorpan steel where the passenger bolt holes were, and I no longer trust the measurements I made previous to cutting out the areas where the bolt holes were. Does anybody know where I can find the four bolt hole pattern measurements? I don't trust my original measurements because they were made off original sheet metal which I also replaced, and sheet metal has a tendency to warp a bit when welding it, and banging it back into place. I have the two holes on the driver's side, and I know how far it was between the two forward holes, ( or top two holes when looking at the photo). So what I need is either the distances between the 4 holes, or the distance between the driver's rear hole and the passenger forward hole.
Follow Ups: