Posted by John B [172.70.42.136] on Wednesday, February 22, 2023 at 15:04:01 :
In Reply to: Re: later dualmatic vs selectro... posted by Chris Case [172.69.33.125] on Wednesday, February 22, 2023 at 07:43:13 :
"hard to read the little letters"
Agreed. To assist with that issue, put the levers in the lock position, on the edge of each lever about a 1/4" from the end, drill a 1/8" hole about 1/8" deep, or make a mark across the lever with a hacksaw or a zip disk, or do both. Now, at a glance, when you see the hole or the rut or both, you know you are in the lock position and ready to go. JJB.