Re: W300 rear brakes


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Rob Steller on Sunday, January 27, 2002 at 3:37AM :

In Reply to: Re: W300 rear brakes posted by Mark S. in Calif on Saturday, January 26, 2002 at 11:34PM :

Mark,

Try Bendix #P320. This worked for me in April 2000. All my Dodge tech manuals indicate that hubs are to be lubed with wheel bearing grease, though they will be contaminated eventually with differential lube. I have drilled and tapped an 1/8" pipe plug into my hubs between the bearing races, slipped some O-rings over my axel shafts to slow the flow of oil out to the hubs, and then assemble dry, and then add about 1 cup of synthetic gear oil through the plug hole. Lets me drain and check for water contamination without opening everything up. You gotta install a new seal and probably a speedy sleeve before doing this. Rob



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com