Posted by Todd Miller [172.70.210.147] on Thursday, July 14, 2022 at 11:51:25 :
In Reply to: Re: Better too long than too short posted by Clint Dixon [172.70.126.157] on Thursday, July 14, 2022 at 10:05:31 :
I am fairly sure that the tank is located in the original position. The front fuel tank mounting crossmember was existent and from looking at other PW's fuel tank positions, the location seems to be correct. Any bends will have to be created in the front half of the fuel line, because the little hump in the fuel line that locates in the hole of the frame crossmember is pre- bent into the fuel line, and I don't want to change it. The rear portion of the fuel line did have to be bent a bit to fit nicely with the tank, and follow the frame.