Posted by john eickhof [162.158.106.111] on Wednesday, March 30, 2022 at 20:19:25 :
In Reply to: Re: Dana 60 axle shafts posted by Jerry in Idaho [162.158.107.166] on Wednesday, March 30, 2022 at 19:33:49 :
jerry, be sure to have them made from sintered
(oilite) bronze with min 5 % nickel, they will last several lifetimes! oversize the o.d. so they will press fit the spindle and undersize the i.d. so they will fit the axle properly after being pressed into place. I have made dozens of different bushings through the years from .022" to 4.66" they are still running strong. any good metal supply can get the round stock for your machinist
Follow Ups: