Posted by Kevin in Ohio [162.158.187.84] on Friday, June 18, 2021 at 19:59:10 :
In Reply to: braden mu2 shift fork posted by Craig [172.69.34.5] on Friday, June 18, 2021 at 18:27:23 :
It is possible to make one. I did on my beater 3/4 ton. The fork part isn't bad if you can find some triple wall pipe in that diameter. I ended up making all the linkage and brackets as it was missing but I had the pieces here from another truck to copy. making the stuff starts at pic 45 if you are interested. They are hard to find as they seem to come up missing or broke off a lot. Don't know of a good source and that is why I choose to make it all.
Follow Ups: