Posted by Vaughn [172.68.143.195] on Sunday, November 29, 2020 at 17:58:36 :
In Reply to: Clutch posted by David Thomas [162.158.63.227] on Sunday, November 29, 2020 at 16:30:11 :
Is it a compression spring or one of the release lever springs in the cover? Some possible causes:
- Loose bell housing,
- Loose or warped flywheel,
- Loose cover,
- Worn or sticking throw-out bearing sleeve,
- Worn crankshaft pilot, clutch fork flange, bell housing bushings,
- Flywheel that has been improperly resurface (surfaced on on angle). Look at the clutch disk step down area on the flywheel to see if it is the same all around.)
Follow Ups: