Posted by John Eickhof [108.162.246.206] on Tuesday, August 04, 2020 at 19:21:16 :
In Reply to: Re: Front Axle shaft bushing trouble posted by jase [162.158.62.120] on Sunday, August 02, 2020 at 18:21:05 :
replace the bushings!!! the new one will press in with about 500lbs pressure, when in it will shrink the id to properly fit the axle shaft, use 'grape-jelly' or known as locktite flange sealant, comes in a tube and looks like grape jelly, to the outside of the bushing when installing.this compounbd will seal the bushin to the housing, yet allow it to be removed if ever replaced again. worn out bushings will attribute to broken cv joints from axle slop and misalignment when turning.
Follow Ups: