Posted by John Eickhof [108.162.245.147] on Tuesday, June 30, 2020 at 21:16:23 :
In Reply to: 1966 W200 brakes posted by Michetti [108.162.246.134] on Tuesday, June 30, 2020 at 17:22:02 :
it will work just fine, be sure you get the splitter block on the frame too so you can seperate the fronts from the rears, it also has a built in 'switch closure' for a brake warning light on the dash. A great improvement and safer than the single cylinder system. follow the brake lines from the booster to the block. you will see how easy it will bve to install. your pedal will work as it is only need to put the push arm on that is on the pedal for the dual type. good luck !
Follow Ups: