Posted by Steve in FH [63.224.47.224] on Tuesday, March 24, 2020 at 19:18:48 :
In Reply to: Re: Pump some grease and see if it come out the hole, nt posted by Jerry In Idaho [69.59.65.183] on Tuesday, March 24, 2020 at 12:42:52 :
Jerry,
It worked! I heated the bushing directly from the inside and then when it was hot I pumped in some penetrating fluid w the "Grease joint rejuvenator". Pushed the melted old grease and fluid through. The grease gun pumped fresh grease out through the hole. Now to lift the danged thing into place.
Thanks all!
Follow Ups: