Posted by Tom in Indiana [172.69.90.55] on Saturday, June 29, 2019 at 02:27:40 :
In Reply to: Re: Update #1.5 posted by Kaegi [108.162.245.121] on Friday, June 28, 2019 at 10:30:39 :
Nope. I sent them off to the company to be rebuilt, so they simply rebuilt them and that's what I have now. I called them earlier and was told that the 5/32" WAS too much, so if I wanted to adjust the levers myself, to turn the three nuts a full turn each to most likely fix the issue. Lou (the guy who rebuilt it) said I could also send it to them and he'd adjust it, if I didn't want to attempt it myself. He also said it could be the throwout bearing binding on the front bearing retainer or the disc binding on the splines, and to check for those. Since I ordered a new clutch kit yesterday, I will wait until it comes in, compare the two, install it, and see if it causes no problems. I'll keep the kevlar-lined one as a spare.