Posted by Kaegi [162.158.107.40] on Tuesday, June 25, 2019 at 11:22:24 :
In Reply to: Re: Clutch woes.. Some things to ponder posted by Milo in Pa [162.158.78.211] on Tuesday, June 25, 2019 at 09:25:51 :
I had one pressure plate that they put in 3 springs in one spot that were too stiff. when you pushed the pedal it would bind up. took about 3 times in and out with tranny and studying linkage to figure it out. The clutch rebuilder replaced it.
I set pressure plate on the ground and took a 2x4 and pushed on each release arm. one was much harder to push than the other 2. looked at color of springs and saw the 3 oddball ones