Posted by Willy-N [162.158.106.87] on Wednesday, September 12, 2018 at 01:41:30 :
In Reply to: Re: TH400 Transmission is back in! posted by Willy-N [108.162.246.8] on Sunday, September 09, 2018 at 22:24:11 :
The Valve Body 2nd gear servo/accumulator was stuck again and on a angle! It bent the "C" Clip holding the pin from dropping out! The new Valve body should take care of it. The pin extender will add a few thousand's to the reverse servo pin length to take care of 34 years of use and a re/build over 13 years ago on the transmission. The steel plate under the valve body kept the 6 ball bearings in place. That will make putting the new one in much easier to do. It has a new Accumulator on it from the factory. Should solve all the problems this time.