Posted by Daryl in Oz [162.158.2.19] on Sunday, April 22, 2018 at 20:18:24 :
In Reply to: Re: Door pillar cleaning posted by Matt Wilson [108.162.221.227] on Sunday, April 22, 2018 at 11:19:54 :
I used a high pressure washer to clean them out - I had to rebuild/replace the bottom 8"-10" on mine - then when it was dry I pumped rust converter through and when that was dry I poured zinc primer through until it ran out the bottom - I did the channels above the door openings same way.
Follow Ups: