Posted by clueless [162.158.122.21] on Wednesday, January 17, 2018 at 15:28:43 :
In Reply to: Re: booster with bracket where it goes posted by clueless [162.158.122.21] on Tuesday, January 16, 2018 at 19:24:19 :
how things work out if you stare at them long enuff!!!!
no pedal wizard here and honestly i was stumped as how to make it work but i think i have it figured out
using some brass fittings on each end of the stock mc bolted in it s stock position the brass fitting are drilled so the stock pushrod slides thru it easily and then i just fill the old stock mc up with grease!!! so push rod slides from now until hell freezes over
push rod is off set but i found a pc of electrical hardware in the hard ware store that has the 5/8 hole for the booster push rod eye already drilled in it and i will drill it offset to line up with the stock push rod and then connect to each a push rod ext.
i think it is strong enuff as it is well supported
i can adust at the booster connection
pics later
Follow Ups: