Thanks Joe, I will add a bit of information


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Bruce in chilly b.c. [162.158.59.37] on Sunday, December 10, 2017 at 20:56:39 :

In Reply to: Re: pictures posted by Joe Cimoch [162.158.79.218] on Sunday, December 10, 2017 at 08:16:51 :

The four hex heads with the washers behind them are holding the one inch thick block of aluminum in place.
This is the same location as the stock Cummins fan hub.
The black pulley just in front of this block is the new idler pulley. Basically there is no snout or fan hub to get in the way.
To the left is the new shroud, it has been bent and fit in place but the tabs and fan cut out have yet to be added.

Waiting for a bottom coolant hose elbow. I hope I can get enough room that the shroud will not need to be notched to clear the lower coolant hose.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


Enter the characters in the image to the left or Load New Code