Posted by Greg Coffin [172.68.34.73] on Wednesday, November 22, 2017 at 12:43:12 :
In Reply to: Heavy Duty 12v Wiper Kits for WDX-WM Power Wagons posted by Greg Coffin [172.68.34.73] on Tuesday, November 21, 2017 at 18:47:14 :
Here's a picture of the driver side wiper motor installed as of today. I have to take it out again to hook up the wiring harness and document the installation process.
The Phillips screw to the right of the motor is the anchor point for the motor, so it doesn't move around in reaction to the wiper motion.
FYI, the bottom edge of the valence opening was modified by the prior owner so he could fit in an oval electric Bosch motor. It is not necessary to fit these new motors. You may also notice the area of the roof seem that was trimmed above the transmission. I cut much more than I needed to (hindsight and all), but some will have to be trimmed for the motor to fit.
Follow Ups: