Posted by scott56 [172.68.141.169] on Saturday, August 26, 2017 at 16:29:51 :
In Reply to: Re: Door window weatherstrip ? posted by Ammo [162.158.74.84] on Saturday, August 26, 2017 at 12:50:41 :
I used urethane to glue the glass into the bottom channel (the one that rides up and down and attaches to the regulator. I used setting tape in the division bar channel. I got the tape from a buddy who had a whole roll. I am glad I used the tape because I had to take the the division bar off and it is no problem like it could have been if glued. When you rivet the right angle weatherstrip to the opposite side of the division bar, make sure it doesn't stick up high than the division bar because the division bar need to slide up and down in the large U weatherstrip and it can be tight. If you need some pictures, I have not reloaded the door yet since I had to remove that angled weatherstrip and re-mount it.
Follow Ups: