Posted by Milo in Pa [162.158.78.19] on Saturday, June 10, 2017 at 19:48:00 :
In Reply to: how did you mount that pump posted by mannyc [162.158.62.210] on Friday, June 09, 2017 at 23:52:38 :
It is the same I had the head mount cut got a piece of pipe from the local hardware and had the local welder weld the pipe to the head mount on both sides. The mopar pump has 4 mounting holes on the front pulley side 2 holes are further away on the pump I measured and had a heavy piece of metal cut in the shape of a C to mount to the front of the pump then welded 2 spacers for the holes further away on the pump so it would mount flat. Then I measured for pulley alignment where to weld the pump mount to the pipe and what angle and had the local welder weld it in place. It worked out good I could of had the pump set more upright but I did not have the front end on and and did not want it close to the support rods.