Posted by Bruce in cold, snowy, bc [108.162.246.236] on Wednesday, March 15, 2017 at 12:59:01 :
In Reply to: Re: 12 valve CTD lift pump questions posted by mannyc [108.162.219.241] on Wednesday, March 15, 2017 at 11:58:21 :
Either way tapping the banjo bolt and running a pressure sensor is a smart way to go. One trick is to run a grease gun hose from the tapped banjo bolt to the remotely mounted sending unit - they tend to be more accurate and last much longer if you go this route.