Posted by Wayne Hillenbrand [162.158.78.145] on Friday, February 10, 2017 at 23:26:50 :
In Reply to: Primer on sand blasted wheels ? posted by Bob in N.GA [173.245.50.105] on Friday, February 10, 2017 at 21:43:07 :
If you are going to paint them I'd use a two part epoxy high build primer. But I'd powder coat them if it was me. Painting requires you seal it, prime it, base coat and clear coat. And clean your gun four times... Powder coating is one shot and bake. No muss no fuss,,,,
Good luck.