Posted by Milo in Pa [162.158.79.218] on Tuesday, January 17, 2017 at 14:29:13 :
In Reply to: Re: Bed wood for a 56 PW posted by Milo in Pa [162.158.79.218] on Tuesday, January 17, 2017 at 12:35:40 :
After you get the wood cut lay the outer boards in place and mark where the wheel opening gos then take it out and put in a piece of cardboard and draw the opening like it is in the picture then cut the cardboard out and lay it on the boards where you have marked they go and use a jig saw to cut out you may have to do a little trimming when fitting the boards but that is not unusual .Thats what I did because I did not have the old boards to go by. Tim Holloway gave me this advise and it worked good
Follow Ups: