Posted by clueless [108.162.212.86] on Monday, January 16, 2017 at 15:10:38 :
In Reply to: Re: rotor hub and posted by Kaegi [108.162.246.44] on Monday, January 16, 2017 at 14:20:47 :
can t wait to see it
i have been trying to avoid machining the hub and my first try was a ring that drove on with the lug studs and was lipped on the inside to miss the wheel stud stop and then drilled for the rotor fastners but it put me to far inside for my caliper to work--might have been able to find one to work but when i checked the wheel stud head runout and there was none it occurred to just snug the rotor against the wheel studs and their stop
which entails some machining but it can still go back to stock
one is going to have to machine the hubs anyway for a brake job(drums) so might as well machine the hub true and then some
trueing the hub may get rid of some of the higher road speed vibration etc.
Follow Ups: