Posted by Willy-N [162.158.75.139] on Friday, January 13, 2017 at 19:53:19 :
In Reply to: Re: noisy starter after engine change posted by Willy-N [162.158.75.139] on Friday, January 13, 2017 at 19:47:10 :
Best to look at the ring and see if it has fresh shinny wear marks or a new feathered edge starting to show before damage can happen. Count the teeth on the ring and starter just to make sure they match up while it is easy to fix. Mark the ring with a felt tip pen and turn it over slowly and count with plugs removed. You should be able to do it with a big screw driver from the bottom. As you count mark it with the count once in a while so you don't forget if you mess up in the process.