Posted by Dave in Reno [199.27.133.57] on Wednesday, November 30, 2016 at 16:12:03 :
In Reply to: NP435 in WC 1/2 ton question posted by Dozerman51 [199.27.133.42] on Wednesday, November 30, 2016 at 14:38:01 :
The only semi bolt in way is Chrysler made a bell housing for a short time, it had three sets of engine bolt holes,one for the slant 6, one for the flat head and a set the the poly/hemi block. It also had trany holes for the 435 and the three speed. It had a hyd. clutch slave and the mounting tabs to go to the frame are in a very different place. I have only seen two both were in 1960 D-100's with flatheads. So want years did Dodge offer the Flat head and the Slant 6 in the Sweptlines.
Follow Ups: