Posted by Willy-N [172.68.59.140] on Monday, November 28, 2016 at 18:27:02 :
In Reply to: anyone distro move about while engine running? posted by DDD [172.68.35.11] on Monday, November 28, 2016 at 17:53:21 :
Might be you have a M37 Oil Pump instead of a PW one. Pull your dist out and look at the gear end and see if the slot is off set some or the slot is in the middle. Then shine a light down the hole and look at the oil pump end to make sure there the same. M37 was offset and PW strait. If you mix them up it will wobble the shaft.
Follow Ups: