Re: Hub nut setting


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by John Waak [162.158.69.130] on Monday, November 14, 2016 at 20:55:19 :

In Reply to: Hub nut setting posted by Terry [199.27.133.57] on Monday, November 14, 2016 at 19:09:16 :

The spindle nut gets torqued to 100 lbs. Tighten the nut while spinning the wheel. Do it again. You will notice an incremental tightening of the nut. Keep repeating the torquing and spinning until you see that the nut no longer moves. Now back the nut off 1/6 turn. Next place the outer nut in place and repeat the torque while spinning sequence as above. When the nut maintains 100 lbs, your done.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com