oops 24 holes and a tape measure

Posted by clueless [108.162.210.234] on Wednesday, October 26, 2016 at 14:20:28 :

In Reply to: so i have a 540 od bolted to the posted by clueless [108.162.210.234] on Wednesday, October 26, 2016 at 12:19:10 :

gives me 1.5 od 10 spline input shaft with 15/16s pilot shaft and it has a 13 in. clutch in it--

tape measure gives me 16 1/4 diam. on the lip od of the tranny side of the bell that would fit into the engine side bell

Follow Ups:

• storage area too dark to get a pic ----- nxt - clueless 14:26:16 10/26/2016
  • 24 holes = 2 sets of 12 - Don in Missouri 17:37:15 10/26/2016
    • the 24 holes are the bell holes not pressure plate holes - clueless 20:21:12 10/26/2016

Post a Followup