Posted by casebro on Thursday, October 18, 2001 at 12:39PM :
In Reply to: Winch Question posted by HWooldridge on Thursday, October 18, 2001 at 10:26AM :
I had a similar problem, loaned the truck to a guy who accidently engaged the pto w/ cable hooked to bumper. Truck stalled, would run only til clutch engaged, stall again. They tried pushing the truck, this made 1 rear wheel spin BACKWARDS ! Being a 41 w/ staight cut tranny gears I could disengage the pto. Try pushing the truck backwards in neutral (use 3rd gear) til the pto can be disengaged. Or cut/ disconnect the winch cable at the hook.
This board is powered by the Mr. Fong Device from Cyberarmy.com |