Posted by clueless [108.162.210.234] on Wednesday, September 07, 2016 at 10:41:28 :
In Reply to: Re: brake update -i should have ordered the stock posted by Daryl in Oz [162.158.3.184] on Wednesday, September 07, 2016 at 07:31:53 :
morning daryl and thnx
all i was trying to do is convert the stock system to dual circuit and wanted to keep it simple and use stock bracket--the only mc that i could find that fit the bill was the one i posted as i adapted it easliy to the stock mounting bracket and the outlets are on the accessible side instead of in the frame channel and almost impossible to get to
just so happens it is a disc disc so would need check valves in each line(right??)
and just so happens it has a proportioning valve to the rear or i could run it to the front or i could ditch the proportioning valve(if i can find and o ring type fitting replace it) where it was and thereby mimic the stock setup in a dual circuit
couple things come to mind--maybe the proportioning valve to the rear is not a bad thing in that i have 4 wheels braking vs the 2 in the front---or maybe the proportioning valve to the rear with the hydravac is not a bad thing and manual front for now an upgrade to another hydravac to the front later
probably should just take the hydravac i have to the rebuilders in san jose and maybe they have another one or order one while they rebuild or make sure that one is good
see how i confuse myself!!!!!!! or just take the stock mc to san jose and sleeve it--done puppy--and sometime in the future work out all the tiny details in my dual circuit mod
Follow Ups: