Posted by Daryl in Oz [162.158.3.189] on Monday, September 05, 2016 at 18:22:15 :
In Reply to: Re: brake update -i should have ordered the stock posted by clueless [108.162.210.234] on Monday, September 05, 2016 at 12:14:38 :
Why not get it sleeved? Brake shop or someone with a good lathe. Bore it out, press in a brass (or stainless) sleeve and hone it to use original piston - never have to do it again. If a brake shop doesn't do it, just remember to re-drill the little holes.