Re: Winch PTO stuck in gear, with cable REALLY tight?


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by John Eickhof [108.162.215.205] on Friday, June 17, 2016 at 18:19:10 :

In Reply to: Winch PTO stuck in gear, with cable REALLY tight? posted by Chris Case [162.158.57.59] on Friday, June 17, 2016 at 14:27:51 :

the pto if engaged and stuck ill not reverse direction with the truck as it is driven off the trans input shaft so any attempt will just pull the cable tighter until something breaks, the solution is trans in neutral, t case in nuetral, then press the clutch in, and hold it while an assistant manually turns the pto drive line to the winch under the truck in the direction that will unwind the winch enough to then put the pto in neutral.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com