Re: M37 Engine Swap


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]

Posted by Chris on June 10, 1998 at 21:00:49:

In Reply to: M37 Engine Swap posted by Chris Davis on June 09, 1998 at 20:39:16:

My WC-53 has a 360, NP420 and 4.89's w/9.00-16 tires. It moves pretty well but is fairly noisy above about 50 mph. It uses the short water pump, 59-68? hydraulic clutch bellhousing with the radiator moved forward about 3/4 " (back of support channel to inside the back flange of it). It uses the original pedals with a hydraulic clutch master cyl mounted to the frame at approximately the rear of the removable floor panel( pain to add fluid). Use the starter with the solenoid mounted on it from e 65 ? back V-8, not the gear reduction variety along with a center dump exhaust manifold from a 70's PU not a rear dump from a car on the left side. Hope this helps a bit.



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Dodge Power Wagon Forum ] [ FAQ ]