Posted by Don in NH [173.245.52.172] on Monday, April 04, 2016 at 15:45:17 :
In Reply to: Re: How do you get the felt in the holders for the front axle? posted by Don in NH [173.245.52.172] on Monday, April 04, 2016 at 15:36:53 :
"the bolt to bit" = "the bolt to bite"
"The shorter ones are in middle and they bottom out" = "The shorter ones are in middle, and the longer ones will bottom out"
And I *think* that this was observed in the two axles I had...but it is probably just a likely that there was a mix-and-match in my setup. But something to watch out for anyway, I had one axle which had one of the retainer bolts broken off, and I suspect that the person was trying to seat the retainer, but the bolt bottomed out and over forced it.
Follow Ups: