Posted by Willy-N [108.162.216.23] on Friday, January 15, 2016 at 00:08:34 :
In Reply to: Re: Bought a Reduction Lug Wrench posted by Dozerman51 [162.158.255.58] on Thursday, January 14, 2016 at 23:51:51 :
I have one works great with a strong bar. Once you break them free there not bad to remove or tighten later. I use a electric impact wrench at home it zips them right off and on once you get them off the first time. If you get sch80 pipe with a 3/4" hole cut the head off a long 3/4" grade 8 bolt. Drill a hole in the pipe a few inches back to weld the bolt in it and not mess up the temper. Stock the threaded end in the pipe weld in the drilled hole and you have a nice bar to us on the Budd Lug Wrench. A Trailer Web Belt Ratchet Bar works good to with the little end on the 4' long pipe.
Follow Ups: